MTB DRAKO 2 SRS MATT
HIGH PERFORMANCE

SOFT INSTEP CLOSURE SYSTEM

The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area.

The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender.

The SOFT INSTEP CLOSURE SYSTEM is replaceable.

TECNO-3 PUSH SYSTEM

TECNO-3 PUSH SYSTEM dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-thefly adjustments. TECNO-3 PUSH can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment.

SINGLE TECNO-3 PUSH

The central mechanism, creates a perfect tension balance between the shoe’s internal and external side. The symmetrical mechanism guarantees an excellent closure adapting on every instep. An innovative button added to the monofilament buckle, if pushed, lifts the buckle to facilitate the adjustment.

ADJUSTABLE
HEEL RETENTION DEVICE

The ADJUSTABLE HEEL RETENTION DEVICE reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider’s heel. The heel retention device tightens the top of the heel cup so that the heel doesn’t slide out during steep climbs or sprints. Each side of the heel can be adjusted independently, for a perfect fit. For a custom adjustment turn the screw towards the + sign to tighten the heel retention device and towards the – sign to open it. Light weight, easy to use, and replaceable.

SIDI HEEL CUP

Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash.

RUBBER TOE

Upper part of the toe section is rubberised to resist and deflect impacts from stones or debris when cycling. It is made with anti-slip rubber.

MTB SRS CARBON-GROUND
SOLE

The MTB SRS CARBON-GROUND SOLE raises the standard for mountain bike performance, dropping off about 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability. The MTB SRS CARBON-GROUND Sole consists of replaceable tread blocks in the toe and heel attached to a medium-modulus carbon sole, plus the innovative Replaceable MTB Plate, designed to prevent sole damage from pedal contact

MTB SRS CARBON-GROUND
SOLE

Most Dual-Retention Bar type MTB Pedals (such as Crankbrothers and LOOK) recommend using a reinforcement plate between the cleat and the shoe in order to prevent cracking or denting the sole. The MTB Plate can be replaced in case of damage from the pedal system, so adding the weight of an aftermarket reinforcement plate is optional. The Ground SRS treads and MTB Plate are easily removable and replaceable. The MTB SRS CARBON-GROUND Sole is toe-spike compatible.

Sidi Cycling Shoes

FLR Cycling Shoes

Sidi Accessories

Cycling Socks and Overshoes

Shoe Size Guide

Where to buy?